check
check
check
check
check
check
check
check
check
check
The V.CMD and N.CMD cold metal detector series provides specialized optical workpiece tracking for cold rolling mills, pickling lines, galvanizing processes, and cold shearing lines. Utilizing visible red laser (V.CMD) and high-penetration infrared modulated light (N.CMD), they detect unheated steel workpieces that emit no thermal radiation. KJT Sensors manufactures the V.CMD and N.CMD series to eliminate tracking failures across cold finishing lines.
In downstream metallurgical operations such as cold rolling, pickling, galvanizing, and shearing, metal workpieces travel at room temperature and emit zero thermal infrared radiation. Standard hot metal detectors are completely blind in these zones.
The V.CMD and N.CMD series are engineered specifically for cold metal detection. They project high-energy optical beams that reflect off or are interrupted by passing cold steel, providing positive workpiece tracking across all cold finishing processes.
The V.CMD (Visible Cold Metal Detector) employs a bright visible red laser or LED light source, making the optical spot easily visible on reflective cold metal sheets during mechanical aiming.
The N.CMD (Near-infrared Cold Metal Detector) utilizes high-power modulated infrared light that penetrates dense industrial oil mist, rolling coolant spray, and atmospheric fumes common on continuous cold reduction mills.
The series is available in two standardized optical configurations to match mechanical line constraints. The R4-2Z1 is a retro-reflective optical system that houses transmitter and receiver in one body, aiming at a reflector across the conveyor.
The T4-2Z1 is a through-beam optical system that separates transmitter and receiver across the roller table, delivering maximum optical penetration through heavy coolant spray on continuous pickling lines.
Cold finishing lines present harsh chemical hazards, including acidic pickling vapors, rolling oil emulsions, and high-pressure water washdowns. The V.CMD and N.CMD series are housed in rugged, corrosion-resistant alloy or stainless steel bodies sealed to IP66/IP67.
Front optical ports are protected by chemical-resistant glass lenses and accept continuous compressed air purge collars to prevent oil mist accumulation on the viewing window.
| Technical Parameter | Specification & Feature |
|---|---|
| Visible Model (V.CMD) | Visible red optical beam for intuitive alignment on cold sheet and strip |
| Infrared Model (N.CMD) | High-penetration modulated infrared beam for heavy oil mist and coolant |
| Optical Configurations | R4-2Z1 (retro-reflective) and T4-2Z1 (through-beam optical pair) |
| Target Compatibility | Unheated cold steel, stainless strip, aluminum sheets, and tubes |
| Enclosure Sealing | Chemical-resistant IP66/IP67 sealed housing with air-purge option |
| Output Interface | Isolated relay contact switching or high-speed solid-state transistor |
Can the V.CMD detect oily or mirror-polished stainless steel sheets?
Yes, polarized optical filtering in the retro-reflective models prevents false signals from mirror-like surface reflections on shiny cold strip.
Which model is recommended for continuous pickling and cleaning lines?
The N.CMD through-beam model (T4-2Z1) is recommended for pickling lines due to its high optical penetration through acid mist and water vapor.
What is the maximum operating distance across conveyor tables?
Through-beam models operate reliably across distances up to 25 meters, while retro-reflective models span up to 10 meters.
Does the optical sensor require warm-up time before operation?
No, solid-state LED and laser light sources provide instantaneous optical operation upon power-up.