check
check
check
check
check
check
check
check
check
check
The HMD2-4ZC1 compact hot metal detector provides space-saving optical workpiece tracking for narrow rolling mill stands, guide troughs, and bar shear conveyors. Built with a slim body profile and integrated optical amplification, it fits into tight machine pockets where standard detectors collide with mechanical frames. KJT Sensors manufactures the HMD2-4ZC1 with heavy-duty 4ZC1 relay outputs for reliable compact mill automation.
Modern high-speed bar, section, and tube rolling lines feature tightly packed mechanical components, including hydraulic roll changers, inter-stand loopers, and coolant manifold blocks. Standard bulky sensor housings simply cannot fit into these restricted clearances.
The HMD2-4ZC1 features a compact cylindrical or slim rectangular housing profile that reduces physical footprint by over 40% compared to traditional models, enabling direct mounting within cramped mechanical tool pockets.
Despite its reduced dimensions, the HMD2-4ZC1 contains a complete optical pyrometric sensor, preamplifier, and output discriminator within its sealed body. High-efficiency photodiode optics capture radiant infrared emissions from moving steel workpieces.
Internal noise filtering suppresses ambient mill light and electrical interference, delivering crisp, millisecond switching signals for precise workpiece tracking and automated shear synchronization.
Mounting in close proximity to hot rolling troughs exposes the sensor body to scale debris and high-pressure water spray. The HMD2-4ZC1 is machined from heavy-duty alloy and sealed with heat-resistant fluoroelastomer o-rings to IP66 standards.
An optional miniature air-purge sleeve threads directly onto the optical lens barrel, directing a steady stream of compressed air across the front glass to prevent dust adhesion and scale damage.
The 4ZC1 output circuit supplies isolated, bounce-free electromechanical relay contacts rated for standard industrial control voltages. Plant electricians can wire the sensor directly into distributed I/O modules or legacy relay logic.
A rear potentiometer allows on-site calibration of the temperature trigger threshold, enabling quick optimization for different steel cross-sections and rolling speeds.
| Technical Parameter | Specification & Feature |
|---|---|
| Form Factor | Compact space-saving cylindrical/rectangular alloy body |
| Optical Principle | Integrated direct-view infrared radiation photodetector |
| Electrical Output | 4ZC1 isolated multi-contact electromechanical relay |
| Enclosure Sealing | IP66 dust-tight and high-pressure spray resistance |
| Threshold Control | Rear-accessible sensitivity potentiometer calibration |
| Purge Protection | Optional miniature compressed air purge and cooling sleeve |
Can the compact HMD2-4ZC1 be mounted directly inside guide troughs?
Yes, its slim profile and optional air-cooling sleeve are specifically designed for mounting inside tight rolling mill guide hardware.
What is the minimum target temperature the HMD2-4ZC1 can detect?
The standard sensor responds reliably to glowing steel workpieces at temperatures from 500°C up to 1200°C.
Does the compact housing overheat without external water cooling?
The sensor operates reliably on air purging alone in moderate ambient zones; an auxiliary cooling sleeve is available for extreme heat locations.
How is the sensor aimed at the steel pass-line?
Compact swivel mounting brackets allow fine angular adjustment to point the optical lens directly at the workpiece trajectory.