check
check
check
check
check
check
check
check
check
check
The NOS-T2 series laser cold and hot metal detector provides dual-state workpiece tracking across continuous caster runouts, plate mill shears, and walking beam furnace entry tables. Featuring high-energy modulated laser optics, it detects both unheated room-temperature steel and glowing slabs up to 1200°C under heavy steam. KJT Sensors manufactures the NOS-T2 in 4ZC1 (relay) and 2ZC1 (two-wire) configurations for versatile plant automation.
Conventional infrared detectors depend entirely on radiant heat from hot steel and cannot see cold workpieces. Standard optical sensors, on the other hand, become saturated by the intense thermal glow of hot steel.
The NOS-T2 solves this challenge using a high-intensity modulated laser transmitter paired with a narrow-band optical receiver. When cold or hot steel interrupts the modulated laser beam, the receiver registers a positive presence signal regardless of workpiece surface temperature or background radiation.
Descaling headers and hot water spray in plate mills generate dense curtains of steam and airborne water droplets that extinguish ordinary optical light. The NOS-T2 emits a high-frequency modulated laser beam with high optical penetration power.
The receiver's digital bandpass filter extracts only the specific modulated laser frequency, effectively burning through dense steam and spray to maintain reliable tracking on fast continuous lines.
The NOS-T2 is available in two distinct electrical interfaces to match plant control architectures. The 4ZC1 configuration features isolated four-wire electromechanical relay contacts and solid-state DC lines for modern PLC digital inputs.
The 2ZC1 configuration provides a two-wire AC/DC connection that wires directly in series with legacy control loops, enabling fast drop-in sensor replacement without running additional power cables.
Operating across wide conveyor spans up to 30 meters requires durable optical alignment stability. The NOS-T2 is housed in a heavy die-cast aluminum alloy body sealed with precision o-ring gaskets to IP66.
Heavy-duty mounting bases with micrometer-fine angular adjustments allow maintenance crews to lock the optical beam firmly on target, resisting conveyor vibration and mechanical shocks from passing heavy slabs.
| Technical Parameter | Specification & Feature |
|---|---|
| Optical System | High-power modulated through-beam / retro-reflective laser |
| Workpiece Compatibility | direct detection of cold steel and hot metal (up to 1200°C) |
| Operating Span | Long-range optical tracking up to 30 meters across conveyor tables |
| Output Variations | 4ZC1 (four-wire relay/transistor) or 2ZC1 (two-wire AC/DC series) |
| Steam Penetration | High-energy optical modulation rejecting dense water mist |
| Housing Rating | Heavy-duty cast aluminum enclosure rated to IP66 standards |
Can the NOS-T2 detect thin steel plates entering a shear line?
Yes, the focused laser beam provides precise spatial resolution, detecting leading edges of thin sheet and plate products accurately.
Does the intense infrared glow of a hot slab blind the laser receiver?
No, optical bandpass filters and narrow-frequency electronic modulation block unmodulated thermal radiation from the hot slab.
What is the advantage of the 2ZC1 two-wire model?
The 2ZC1 model connects directly in series with existing control wiring, allowing rapid retrofits without running new multi-conductor cables.
How does the sensor maintain lens cleanliness in wet spray areas?
Standard compressed air purge hoods maintain continuous positive air pressure over the optical glass, blowing water droplets away.