check
check
check
check
check
check
check
check
check
check
The 3ETC-I crane laser anti-collision alarm system provides continuous optical distance measurement and multi-stage safety interlocking for overhead traveling cranes and gantry equipment. Utilizing time-of-flight laser optical ranging, it tracks inter-crane separation up to 50 meters to prevent catastrophic runway collisions. KJT Sensors manufactures the 3ETC-I with heavy-duty anti-vibration housings to ensure reliable crane bay safety.
In industrial bays where multiple overhead traveling cranes share the same runway rails, operator distraction or brake slippage can lead to dangerous crane-to-crane or crane-to-wall collisions. The 3ETC-I continuously emits high-frequency modulated laser pulses toward a retro-reflector mounted on the opposing crane.
By measuring the round-trip transit time of the reflected light, internal microprocessors calculate exact real-time separation distance with centimeter accuracy, providing independent safety oversight over manual operator controls.
Heavy cranes carrying massive loads cannot stop instantaneously without causing dangerous load swing. The 3ETC-I incorporates programmable multi-stage safety alarm zones.
When separation closes below the Warning threshold, the system triggers audible and visual alarms while activating the crane drive's deceleration circuit. If the cranes continue to approach the critical Stop threshold, an isolated safety relay opens to initiate emergency mechanical braking.
Steel fabrication shops, foundries, and paper mills generate significant airborne dust, welding smoke, and particulate matter that can scatter optical light. The 3ETC-I employs high-energy infrared laser diodes paired with multi-pulse averaging algorithms.
This durable optoelectronic design maintains reliable target acquisition through dusty plant atmospheres, preventing false alarm trips while ensuring fail-safe distance measurement up to 50 meters.
The 3ETC-I is built into a heavy die-cast aluminum housing fitted with heavy-gauge shock-absorbing mounting brackets that cushion the instrument from runway rail jolts. An on-board digital display allows technicians to set alarm distances directly on the unit.
Independent fail-safe relay contacts wire directly into the crane's travel drive control circuits, enabling direct safety interlocking without requiring complex external communication gateways.
| Technical Parameter | Specification & Feature |
|---|---|
| Measurement Technology | High-frequency time-of-flight laser optical ranging |
| Operating Range | Up to 50 meters inter-crane separation tracking |
| Safety Interlocking | Multi-stage configurable alarm and emergency stop relay outputs |
| Measurement Accuracy | Centimeter-level real-time distance resolution |
| Housing Protection | Vibration-damped cast alloy enclosure rated to IP66 |
| Target Device | High-efficiency optical retro-reflector target panel |
Can the 3ETC-I protect against collisions with end-of-bay runway stops?
Yes, mounting a retro-reflector panel on the bay end-wall allows the 3ETC-I to provide crane-to-wall deceleration and stopping protection.
Does crane runway sway or misalignment cause loss of laser target?
The retro-reflector target panel features a wide optical acceptance angle that accommodates normal crane sway and rail lateral deviation.
How are warning and stopping distances configured?
Distances are programmed using intuitive pushbuttons and a digital display on the rear of the unit, or via software calibration tools.
What happens if the optical beam is blocked by another crane hook?
The system features fail-safe signal loss logic that automatically triggers early warning states if the target reflector is obscured.