check
check
check
check
check
check
check
check
check
check
The HMD2000 long-range hot metal detector system provides extended-distance optical tracking for heavy slab casters, blooming mills, and ingot transfer cars. Built with high-gain multi-element infrared optics, it enables standoff mounting away from direct molten metal spatter while maintaining dependable signal response. KJT Sensors manufactures the HMD2000 with heavy-duty optical shielding to ensure reliable presence interlocking in primary metals production.

In primary steelmaking operations such as ingot pouring and heavy slab blooming, mounting a sensor close to the roller line exposes it to physical damage from flying slag, crane hooks, and radiant heat bursts. The HMD2000 solves this challenge by extending optical detection distance up to several meters away from the roll centerline.
Its high-aperture optical lens gathers concentrated infrared radiation across long atmospheric paths, allowing plant designers to mount the instrument securely on gallery walkways, structural building columns, or protective overhead cantilevers.
Atmospheric conditions above heavy roller tables often feature dense columns of rising heat, steam, and airborne scale. Single-point optical receivers can experience signal flutter when hot air turbulence refracts the optical beam.
The HMD2000 incorporates a multi-element sensor arrangement combined with integrated high-gain preamplifiers. This design integrates radiation across a wider optical aperture, smoothing out atmospheric turbulence fluctuations and delivering a rock-solid switching output to plant PLCs.
Mounting an instrument at long distances requires precise angular alignment to ensure the optical axis intersects the workpiece trajectory. The HMD2000 includes a heavy-duty pan-and-tilt mounting base with fine-threaded mechanical adjustments and locking clamps.
Engineers can quickly align the detector toward the target pass-line and lock the orientation permanently against heavy structural building vibration, ensuring zero misalignment over years of continuous mill operation.
The output interface of the HMD2000 provides dual-isolated electromechanical relay contacts and solid-state DC switching lines. These isolated outputs feed directly into distributed I/O stations, motor control centers (MCC), and emergency brake interlocks.
By confirming when large slabs enter and exit transfer cars, the HMD2000 prevents transfer table collisions and synchronizes ingot handling cranes across heavy manufacturing bays.
| Technical Parameter | Specification & Feature |
|---|---|
| Detection Range | Extended long-distance standoff optical tracking |
| Optical Architecture | Large-aperture lens with multi-element detector array |
| Mechanical Alignment | Heavy-duty three-axis pan-and-tilt aiming bracket |
| Environmental Sealing | Cast alloy housing rated for harsh metallurgy environments |
| Cooling Interface | Integrated water-jacket and air-purge connection ports |
| Signal Output | Dual-isolated relay contacts and fast solid-state outputs |
What is the maximum practical standoff distance for the HMD2000?
Depending on target slab dimensions and surface temperature, the HMD2000 operates reliably at standoff distances ranging from two to more than six meters.
Does rising hot air turbulence cause false switching?
No, the multi-element receiver array and integrated signal averaging filters suppress optical scintillation caused by rising heat waves.
Can the HMD2000 be mounted overhead above the roller table?
Yes, overhead cantilever mounting is common in heavy blooming mills to keep walkways clear and protect cables from floor-level damage.
What maintenance is required for long-distance optics?
Periodic inspection of the front protective glass and verification of clean compressed air purge flow ensure maximum infrared light throughput.