check
check
check
check
check
check
check
check
check
check
The HMD1 series hot metal detector is an industrial infrared optical sensor designed to track radiant steel on transfer tables, billet casters, and rolling lines. It senses thermal radiation emitted by glowing metal workpieces and switches control circuits without touching the product. KJT Sensors manufactures the HMD1 with integrated optical amplification and heavy-duty water-cooling jackets to ensure continuous operation near hot steel.

The HMD1 operates by focusing radiant infrared energy emitted by hot metal onto a high-sensitivity photodetector. When steel workpieces reach rolling temperatures, their thermal emissions peak in the near-infrared spectrum. The internal optical system filters out background visible light and factory illumination, directing only target radiation onto the sensor element.
Once the incoming radiation exceeds a preset threshold, the built-in amplifier triggers an internal discriminator. This solid-state design delivers millisecond switching speeds, allowing downstream automation systems to capture the exact arrival time of fast-moving billets without mechanical switch bounce.
Heavy metallurgy facilities install the HMD1 along reheating furnace exit tables, continuous casting runouts, and primary breakdown stands. At furnace discharge points, the sensor confirms that a heated billet has cleared the door before the next push cycle starts.
On transfer roller tables, multiple HMD1 units track the leading and trailing ends of hot slabs. This position feedback enables the mill control system to accelerate conveyors, sequence descaling sprays, and synchronize side-guide positioning with zero operator intervention.
Operating in close proximity to radiant steel exposes sensing hardware to severe ambient heat, airborne scale, and cooling water mist. The HMD1 addresses this through an optional heavy-duty aluminum or stainless water-cooling jacket that circulates plant water to keep internal electronics well below critical operating limits.
An integrated air-purge hood delivers a continuous positive-pressure curtain of clean compressed air across the optical front window. This air barrier prevents airborne dust, oil vapor, and steam droplets from settling on the lens, ensuring unobstructed optical transmission between maintenance shutdowns.
The HMD1 is available in multiple electrical configurations to match legacy and modern control architectures. The standard 4ZC1 configuration features a multi-pole relay contact output that provides isolated potential-free switching signals directly into mill junction boxes and input cards.
Transistor-based DC configurations are also supplied for high-speed digital inputs where solid-state responsiveness is required. This modular electrical design allows plant electricians to replace obsolete detector bodies without rewiring control cabinets or adding intermediate signal isolation relays.
| Technical Parameter | Specification & Feature |
|---|---|
| Target Temperature Response | Typically 450°C to 1200°C radiant metal emissions |
| Optical Sensing Principle | Direct-view infrared pyrometric photodiode array |
| Response Time | Under 5 milliseconds solid-state optical trigger |
| Housing Protection | Heavy-duty cast alloy with optional water-cooling shell |
| Lens Maintenance | Integrated compressed-air purge collar |
| Electrical Output Options | Isolated relay contacts (4ZC1) or solid-state switching |
Will steam plumes trigger false switching on the HMD1?
The HMD1 utilizes narrow-band optical infrared filtering and adjustable sensitivity thresholds to minimize false tripping from steam, although continuous dense steam should be cleared using optical air-purge collars.
How close to the hot roller table can the HMD1 be mounted?
Mounting distance depends on the optical field of view and target size; typical installations position the sensor between one and four meters away from the roll line to avoid mechanical impact.
Can the detection sensitivity threshold be calibrated in the field?
Yes, an accessible rear potentiometer allows technicians to raise or lower the trigger threshold to suit specific billet temperatures or ambient radiant backgrounds.
What cooling water flow is required for the cooling jacket?
Standard industrial plant water supplied at moderate pressure provides sufficient thermal dissipation to keep internal housing temperatures within reliable limits.