check
check
check
check
check
check
check
check
check
check
The HMD5 series hot metal detector provides high-speed optical workpiece tracking for continuous casting runouts, billet cut-off tables, and roughing mill entries. By measuring radiant infrared energy directly from moving steel, it delivers precise position feedback under dense steam and water spray. KJT Sensors builds the HMD5 with dual sensitivity calibration to isolate hot targets from radiant background walls.

Continuous casting cut-off sections represent some of the most aggressive sensor environments in a steelworks. Torches or hydraulic shears generate intense localized heat, while secondary cooling nozzles produce clouds of pressurized steam and scale spatter. The HMD5 is engineered specifically to maintain optical focus under these conditions.
Its optical assembly captures infrared emissions in the near-infrared band where hot steel emits strongly. Built-in electronic threshold filtering distinguishes the compact profile of a moving strand from diffused radiant heat bouncing off wet splash shields.
Factory floors in continuous mills often contain glowing background objects, such as heated roll collars or furnace framework, that emit low levels of infrared noise. The HMD5 incorporates multi-turn sensitivity calibration to set an exact switching trigger point.
Technicians can calibrate the sensor to trip only when a hot slab enters the optical field of view, while ignoring the lower radiation levels of surrounding mechanical structures. This stable threshold discrimination prevents premature shear actuation and erroneous line stops.
The exterior casing of the HMD5 is cast from corrosion-resistant aluminum alloy with thick wall cross-sections to absorb mechanical vibration. The front optical tube accommodates a quick-mount air-purge adapter that channels compressed air across the glass viewing port.
This continuous air sweep creates a vortex that repels scale dust and cooling water droplets. When combined with an external water-cooling sleeve, the detector operates reliably even when positioned adjacent to molten metal pouring zones.
Output signals from the HMD5 feed directly into strand tracking controllers and plant automation networks. Depending on the selected variant, the sensor supplies high-capacity electromechanical relay contacts or fast-switching solid-state outputs.
These output pulses notify the PLC when the leading edge of a cast strand reaches the designated cut-to-length marker, initiating torch clamping or shear travel with repeatable spatial accuracy.
| Technical Parameter | Specification & Feature |
|---|---|
| Target Temperature Range | Standard 350°C to 1200°C (wide-span optical response) |
| Field of View | Fixed optical angle focused on strand centerline |
| Enclosure Sealing | IP66 dust and high-pressure water spray resistance |
| Thermal Dissipation | Air-purge hood standard; water-cooling jacket optional |
| Output Type | Relay switching or solid-state transistor |
| Operating Ambient | -20°C to +70°C ambient; extended with water cooling |
Can the HMD5 detect steel strands below 500°C?
Yes, the HMD5 features low-temperature optical tuning that detects radiant metal down to approximately 350°C on slow-cooling casting beds.
How is the optical window cleaned during production runs?
The active compressed air purge continuously blows dust and mist away, minimizing the need for manual window cleaning between scheduled maintenance shifts.
Does ambient mill lighting cause false triggers on the HMD5?
No, internal optical bandpass filters block visible factory lighting, mercury vapor lamps, and sunlight, responding only to infrared radiation.
What is the advantage of using relay outputs on the HMD5?
Relay contact outputs provide isolated, noise-immune switching that connects directly into legacy 110V/220V control circuits or 24V PLC inputs.