check
check
check
check
check
check
check
check
check
check
The HMD600 scanning hot metal detector features an oscillating optical scanning mechanism designed to monitor wide plate mills, transfer cooling beds, and meandering slab conveyors. It sweeps an infrared detection beam across broad lateral fields of view to track steel workpieces that wander across the roller table. KJT Sensors manufactures the HMD600 with an internal optical purge to maintain edge-detection accuracy.
Fixed-angle detectors observe a narrow spot along the centerline of a conveyor. On wide plate mills or cooling beds, however, hot plates and slabs frequently shift laterally or curve, moving completely out of a narrow sensor's sightline.
The HMD600 incorporates an oscillating optical mirror assembly that sweeps the infrared sensing beam across a wide angular arc (such as 15° to 30°). This scanning motion continuously sweeps across the entire roller table width, detecting incoming hot metal regardless of its lateral positioning.
As hot steel enters the scanning sector, the oscillating optical beam intercepts the radiant front edge multiple times per second. High-speed signal processing circuitry records the exact angular instant the infrared threshold is crossed.
This continuous angular tracking generates sharp leading-edge and trailing-edge timing pulses, enabling plate shear automation systems to execute square crop cuts and crop optimization without requiring mechanical side-guides.
Continuous mechanical scanning inside high-temperature mill surroundings requires rugged internal engineering. The HMD600 houses its precision motor drive and oscillating optics within a sealed, vibration-damped aluminum alloy casting.
An internal air channel directs filtered compressed air directly across the optical scanning window, keeping the sweeping lens free from scale dust while providing internal thermal stabilization for the drive motor and electronics.

Key installation points include plate mill roughing and finishing tables, hot leveler entries, cooling bed transfer grids, and downcoiler approach tables.
By replacing clusters of multiple fixed-point sensors with a single wide-angle scanning unit, plant operators simplify conveyor instrumentation, reduce maintenance cabling, and eliminate tracking blind spots across wide processing lines.
| Technical Parameter | Specification & Feature |
|---|---|
| Scanning Principle | Oscillating optical mirror with wide angular coverage |
| Angular Sweep Field | Wide lateral field of view (up to 30° scanning sector) |
| Target Temperature | Standard rolling mill temperatures from 400°C upwards |
| Scanning Mechanism | Precision brushless motor drive with optical feedback |
| Purge Protection | Internal vortex air purge for continuous window cleaning |
| Output Interface | High-speed solid-state logic outputs and relay contacts |
Why choose a scanning detector over multiple fixed spot sensors?
A single HMD600 covers the entire conveyor width, eliminating the complex mounting brackets, multiple cables, and blind zones associated with sensor arrays.
Does the scanning mirror mechanism require frequent lubrication?
No, the internal motor drive utilizes permanently lubricated, high-temperature sealed bearings designed for long maintenance-free service life.
Can the HMD600 detect plates that enter off-center?
Yes, the wide angular sweep detects radiant steel anywhere within the scanning field, regardless of lateral plate drift on the rollers.
How does the scanning speed affect line tracking response?
The high oscillation frequency ensures multiple optical passes per millisecond, delivering crisp leading-edge detection on fast plate lines.