check
check
check
check
check
check
check
check
check
check
The VOS-T2 series optical metal detector delivers long-range through-beam laser tracking for heavy plate mills, tube rolling plants, and hot/cold transfer conveyors. Operating across distances up to 30 meters, it detects both room-temperature cold pipe and glowing hot slabs under dense steam and water spray. KJT Sensors manufactures the VOS-T2 in 4ZC1 (relay) and 2ZC1 (two-wire) models to ensure dependable conveyor interlocks.
Heavy plate and pipe rolling facilities utilize broad conveyor tables spanning 10 to 30 meters across. Standard optical proximity sensors lack the optical throw required to span these distances, while ambient thermal glow can overwhelm optical receivers.
The VOS-T2 utilizes a high-collimation modulated laser transmitter and receiver pair. The tight laser beam maintains intense optical energy across the full 30-meter span, delivering clean optical beam interruption signals whenever cold or hot metal traverses the line.
Hot water descaling and cooling sprays create turbulent steam plumes that refract and scatter optical light. The VOS-T2 laser beam is electronically modulated at high carrier frequencies.
The optical receiver demodulates only the matched carrier frequency, ignoring ambient factory light, rolling sparks, and unmodulated infrared radiation from hot steel workpieces, ensuring positive beam interruption without false triggering.
The VOS-T2 is available with two distinct electrical interfaces to match plant electrical standards. The 4ZC1 configuration provides isolated four-wire electromechanical relay contacts for direct connection to modern PLC inputs and safety circuits.
The 2ZC1 configuration offers a two-wire series interface compatible with AC/DC control loops, enabling fast retrofit replacement on older rolling mill sections without pulling new multi-conductor cabling.
Vibrations from heavy rolling passes and crane traffic can shift optical alignment over long spans. The VOS-T2 is housed in a heavy-duty die-cast aluminum enclosure with sealed glass optical ports and stainless steel hardware.
A precision three-axis mounting bracket with fine-pitch horizontal and vertical adjustments allows maintenance technicians to lock the laser beam on center, maintaining alignment stability through severe mill vibration.
| Technical Parameter | Specification & Feature |
|---|---|
| Optical Configuration | Long-range modulated through-beam laser transmitter and receiver |
| Operating Distance | Up to 30 meters across wide plate and pipe conveyor tables |
| Target State | Detects cold steel at ambient temperature and hot steel up to 1200°C |
| Output Variations | 4ZC1 (isolated relay contacts) or 2ZC1 (two-wire AC/DC series) |
| Environmental Resistance | High-penetration laser modulation rejecting steam and water mist |
| Housing Protection | Heavy-duty cast alloy enclosure rated to IP66 standards |
Can the VOS-T2 detect cold, black-scaled steel pipes reliably?
Yes, the through-beam laser system detects presence via complete beam interruption, making it completely independent of workpiece surface reflectivity.
How is the laser beam aligned across 30 meters on site?
The visible laser option and precision three-axis adjustment bracket allow quick visual aiming and optical locking during installation.
Does the optical lens require continuous air purging?
An integrated air-purge hood is highly recommended in wet, steamy rolling areas to keep water droplets and dust off the optical window.
What is the response time of the VOS-T2 optical receiver?
The high-speed optoelectronic receiver responds in single-digit milliseconds, providing accurate leading-edge position capture on fast conveyors.