check
check
check
check
check
check
check
check
check
check
KJT Circulating Water Pump Condition Monitoring Application Solution
Workshop circulating water pumps handle continuous water supply duties, requiring routine manual rounds to measure temperatures, check vibration levels, and compile records unit by unit. Capturing subtle condition shifts between inspection intervals—as well as operating trends before and after anomalies—demands continuous, automated tracking.
By integrating field sensors, data acquisition hardware, and the Predictive Maintenance and Health Management (PHM) Platform, KJT translates real-time equipment changes into actionable insights for routine inspections and targeted maintenance.

Suitable measurement points are installed at fixed structural locations—such as motor and pump bearing housings—to continuously capture vibration and surface temperature data and track overall operating health.
| Monitored Metric | Value to Maintenance Operations |
| Vibration Variations | Detects shifts in operating state, providing early diagnostic clues for inspecting bearings, couplings, and mounting integrity. |
| Temperature Trends | Tracks localized temperature rise alongside load and operating conditions to aid root-cause troubleshooting. |
| Historical Records | Enables before-and-after comparisons across fault events and maintenance interventions. |
Alerts are mapped directly to specific equipment units and measurement points, allowing maintenance personnel to immediately prioritize which locations to inspect first.
Depending on existing pump room infrastructure and the spatial distribution of measurement points, either wired or wireless connectivity architectures can be deployed:
| Connectivity Path | Hardware Pairing & Field Role |
| Wired Monitoring | Wired vibration and temperature sensors paired with an Edge Intelligent Data Collector for high-precision signal acquisition and local processing—ideal for fixed measurement points where cabling is feasible. |
| Wireless Monitoring | Wireless Vibration & Temperature Sensors paired with a Wireless Smart Gateway to capture, aggregate, and upload data—streamlining deployment in locations where running signal cables is impractical. |
Both architectures integrate seamlessly into the PHM Platform for centralized equipment visibility. Wireless deployments are tailored according to measurement axes, sampling rate requirements, installation environments, and wireless coverage.
The condition-based maintenance workflow operates in the following sequence:
Status Overview → Trend Comparison → Anomaly Alert → On-Site Verification → Maintenance Execution
The platform aggregates operational data and supports root-cause diagnostics through trend curves, automated alarms, and diagnostic reports. Maintenance engineers combine these insights with rotational speed, load parameters, and physical inspections to pinpoint fault causes and schedule corrective actions.
Focused Inspections: Prioritizes equipment and measurement points exhibiting active changes, eliminating repetitive unit-by-unit checks.
Evidence-Based Troubleshooting: Combines historical trends with operating conditions to narrow down the inspection scope.
Verifiable Maintenance Results: Compares pre- and post-maintenance baselines under similar operating conditions to validate repair effectiveness.
Provide your pump types, operating parameters, and current monitoring methods, and KJT will assist in matching the optimal sensors, data collectors or gateways, and platform integration plan—giving your pump room inspections clear focus and your maintenance schedules solid data backing.